A new roof is always more expensive than the old one, but the same goes for shingle roofing Toronto. New roofs need to be installed at a much faster pace in Toronto. The fact is that you don’t need to wait too long because the demand for it is increasing. If you are ready to install it on your own, you might find a number of obstacles standing in your way.
You need to consider your tools and skills before you start. Get a professional roofer for this task, preferably someone who is also a licensed roofing contractor. This is important especially if you are planning to do the installation yourself. In case of any trouble, a licensed professional will be there to help.
Asphalt shingle is the most common material for shingle roofing Toronto. There are other materials, but asphalt shingles are the most commonly used. But if you have the right materials, you can create the most beautiful roofing, even on your own. This is what makes installing shingles an intimidating task for many homeowners.
First, you need to prepare all the materials you will need for the job. These include roofing nails, roofing shingles, tar paper and roofing caulk. Since you are not a trained professional yet, you might need to purchase these materials from the local hardware store. Roofers use high quality materials in a roofing job. Don’t be afraid to ask for help.
Once you have the right materials, you can now set up shop. Start by laying out the location where you are going to install the shingles. Prepare the ground by clearing it of all debris. It also needs to be flat and level. Take note that if the shingles are set on a slope, they may not fit properly. This means that you might need to cut them or relocate them if they don’t fit.
Once the area is cleared, you can start installing the shingles. Start by placing the first few nails at the bottom of the shingle. You can use your trowel to spread the nails evenly. It would be better if you can have two people to help you. Once you are done installing the shingles, you can now nail the roofing panels together.
To finish, you can nail the last few segments of shingles. The last one should be fixed on top of the previous one. And you can now set the roofing panel on top of the nail bed. As you can see, installing shingles on your own can be quite difficult but is not impossible.
To install shingles on your own, you will need to learn how to use a nail gun. There are many different brands of nail guns available in the market. The best brand would be the Makita brand. They are durable and produce smooth and even shingles. Remember that if you plan to do this job yourself, you must first have the right tools and materials ready. And it would be a great help if you could borrow or rent some tools from a nearby hardware store.
You will also require some roofing nails and shingle pieces. These two things are quite expensive. Hence, it will be better if you borrow some tools from a friend or from your family member. Get quality nails and shingles for doing this job.
Start with measuring the length of the shingle that you need. It is important that you do not borrow nails and shingles that are shorter than the one you need. This will only make matters worse. Better go with the ones that are longer so that you can ensure that you have put them securely to ensure that it cannot fall off.
Take all the materials needed such as nails, shingles, roofing scissors, rubber mallets and hammer. Then find a good spot where there are no footprints so that your work area is protected from paint or stains. The location you choose should be flat and clean. This ensures that your work does not stain. You may want to use a tarp underneath so that you can protect the nails and shingles from any spills. Put roofing gloves on before starting to hammer the nails.
Make sure that you have secured all the materials to the roof. Use a hammer and nail gun for nailing down the shingles. You may have to move some shingles to get the nails hammered in firmly. As roofing tips, you have to start at the bottom of the shingle. Work your way up the shingle until you get to the top. You can install as many as you need for your house.